Trouble Shooting Residential Tanning Beds

A residential tanning bed is typically purchased by people who want to have a tan with out bothering to dress up and go to a tanning salon. Visiting the best self tanning lotion perhaps provides warnings you might give to your friend. A tanning bed at residence makes it more convenient for a person to get that great tan. Visit site link to explore why to consider it. But a residential tanning bed also implies extra duty for the owner. Technologies is never ever ideal, like the humans who use them. Therefore, the home tanning bed might be topic to a number of problems. Luckily, the owner of such tanning bed require not call a technician every time one thing goes incorrect with it. Here is a guide that will be beneficial for the owner of a residential tanning bed.

If the bed refuses to commence or to turn on, there could be four possible motives:

1. There is no power supplied to the bed

2. There is a undesirable relay

three. There is a loose at the relay

four. There is a loose wire at the dial timer

The owner should inspect the plug and the breaker to make confident that there is energy going to the bed. If the relay is bad, then there is no other way to fix the bed but to replace the relay. As for loose wires, all the owner has to do is to tighten the loose connection.

If the lamps dont light up, there are 5 achievable causes:

1. Malfunctioning lamps

two. Malfunctioning ballast

3. Malfunctioning lamp holder

4. Malfunctioning starter

five. A loose wire at the ballast, or at the lamp holder or at the terminal

For any malfunctioning element of the tanning bed, the owner will need to have to replace it. The owner should not try to fix it by himself. For the loose wire, the owner may possibly just tighten the loose connection.

If the bench lamps will not light up, the cause could be any of these:

1. The bench is not plugged into the canopy

two. Hit this URL tanning to read the reason for it. A loose wire in the connector among the bench and the canopy

3. The wire in the bench-to-canopy connector might be burnt

The owner need to check if the bench is securely plugged into the canopy. If not, he ought to right the predicament. The loose wire necessary only a tightening. But if the wire is burnt, the owner need to retrieve some electrical tools so that he can strip the wire and replace the connector.

If the lamps do not function well but the fans are operating fine, there are only two issues to verify:

1. The relay

2. The wire either at the terminal block or the relay

The owner should verify no matter whether the relay is malfunctioning or not. If it is not operating appropriately, this relay must be replaced. Any loose wire at the terminal block or at the relay can be corrected by tightening the connection.

For other tanning bed troubles, it is ideal that the owner consults the technician of the tanning bed supplier..

Write a comment

Comments: 1
  • #1

    Karolyn Castellano (Saturday, 21 January 2017 20:04)

    Hey! This post could not be written any better! Reading through this post reminds me of my good old room mate! He always kept talking about this. I will forward this article to him. Fairly certain he will have a good read. Many thanks for sharing!